Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11

8 Circuit FORD Restoration Wiring Harness

Usually Ships Within 24 Hours

Build Your Harness



Made In The USA
Made in USA
The Kwik Wire 8 Circuit Ford Restoration Wiring Harness is the best Ford option on the market. Kwik Wire is located in Wisconsin where every bit of the harness is manufactured. All of our restoration wiring harnesses are 100% built and manufactured in the USA.

Will This Work In My Project?

This 8 circuit wire harness will fit Ford restoration projects as a cut-to-fit harness.
Ford Wiring Harness LogoThis kit is designed for any Ford made before 1979 or any Ford model with a carburated motor including the Corsair, Coupe, Roadster, Crestline, Fairlane, Model T, Model A, Galaxie, LTD, Ranchero, Sedan Delivery, Skyliner, Special, Standard, Starliner, Super Deluxe, Torino, Mustang, Bronco, Pickup, custom projects, and more!
Each group of wires are provided with plenty of wire length to cover virtually every Ford vehicle make and model. The wire will be plenty long for your project, allowing you to cut them to the perfect length and the perfect fit for your vehicle.

What's Included?

This wiring kit comes with everything you will need to wire up your vehicle. It supports the circuits below.
Front of Vehicle

Hazards -- Headlights (Low & High) -- Parking Lights -- Turn Signals

Alternator -- Coil -- Oil Pressure Sender -- Starter -- Tachometer -- Water Temperature

Gauges -- Horn -- Ignition on Column/Dash -- Radio Power -- Windshield Wipers
Rear of Vehicle

Backup Lights -- Brake Lights -- Electric Fuel Pump -- Hazards -- Third Brake Light (Optional) -- Trunk Light -- Turn Signals

Accessories Parts Box

Every kit comes with a box of parts that includes various connectors & terminals that you'll need for your install.
Wiring Components Included

Unique Features

Kwik Wire Restoration Wiring Harnesses provide beneficial features in your wiring kit that many competitors across the industry do not.
Coil Kill Switch: This switch, located on the side of the fuse panel, kills power to the coil while allowing power to flow freely to the rest of the vehicle. Listen to the radio at shows while still The switch provides a peace of mind that your ride is safe when it is parked.
Custom Aluminum Base Plate: The custom cut brushed aluminum base plate provides an easy solution for mounting your fuse panel inside your restoration project.
Stainless Steel Fuse Cover: These restoration wire harnesses also come with a stainless steel brushed cover over the fuses to provide a very clean and custom look while protecting your fuses from the elements.
Speaker Wire Included: Unlike many of the other outsourced harness options in the industry, our wiring kits include speaker wire built right into the kit to provide you less hassle during installation.
50 Amp Maxi Fuse: The included 50 amp maxi fuse provides a better and safer option than fuse-able link wire when considering the safety of your wiring system for your restoration project.
Full Size ATO Fuses: This kit is built using full size ATO Fuses unlike many outsourced wiring harness options that use hard-to-replace mini fuses. All fuses are included and installed according to proper engineered specifications.
Hand Soldered: Every wire terminal inside the fuse panel is crimped and hand-soldered making every connection and circuit safe and reliable. Kwik Wire is the only manufacturer in the industry that goes the extra mile to hand-solder their connections in the fuse block.

The Wire

Kwik Wire 8 Circuit Ford Restoration Wiring Harnesses are built using the highest quality of wire in all of their kits. They use a thicker gauge of stranded wire than many competitors in the industry to ensure the safety and quality of your project. The wire sports a GXL type coating that is specifically designed to withstand the wear and tear in the engine component. GXL wire provides resistance against heat (up to 257°F), and liquid.
Each wire is color coded, numbered and labeled with the destination printed every four(4) inches with easy-to-read, clear and concise text. The numbering system provides easy lookup in the easy-to-use instruction book included with every restoration wiring harness. Installation is as easy as going through every wire one-by-one according to the simple instructions designed for beginners to advanced builders.
Easy To Read Wire Labels

Product Option Descriptions

Trunk Mount: Fuse Panel in Trunk

Don't worry about having to get up under the dash to access your fuse panel. Lengthen the wire groups in your harness with this option to allow the fuse panel to be mounted in the trunk of your car. Easy access from here on out!

Dash Harness: Gauges Wiring Kit

This product option makes it easy to wire up your gauge cluster. You'll be able to take your entire cluster out of the vehicle and wire it up on your work bench. From there, just bring your cluster back to your dash and plug everything in with one easy connector.

Built-In Grounds: Fiberglass Body

Typically used with fiberglass body builds, get your grounding wires integrated right in your wiring kit with this option. Getting good grounds in your system has never been so easy!

6-Volt: 6-Volt Wire Harness

Keeping your build 6-Volt? Our kits come standard as 12-volt kits but can be converted with this option. Your kit will support the same circuits as listed while supporting your 6-Volt system out of the box.

4 Headlights: 4 Headlight Plugs

Our kits come standard with 2 headlight plugs. Add this option if your build has 4 headlights, and we'll throw in another set of connectors with the kit.

Fuel Pump Relay: Pre-Wired Relay Kit

Many electric fans need to be relayed due to the amperage they pull. Make wiring yours easy with this pre-wired fan 30/40 amp relay kit.

Electric Fan Relay: Pre-Wired Relay Kit

Many electric fuel pumps need to be relayed due to the amperage they pull. Make wiring yours easy with this pre-wired electric fuel pump 30/40 amp relay kit.

Halogen Headlight Relay: Pre-Wired Relay Kit

If you're converting your headlights to halogen, they will most likely need to be relayed due to the amperage they pull. Make wiring yours easy with this pre-wired 30/40 amp relay kit. It comes in both 2-headlight & 4-headlight configurations.

HEI Connectors: Male & Female Connector w/Terminals

Using an HEI ignition module? Add the connectors & terminals you'll need to hook into your electrical system with this option.

Weather Pack Connector Kit: 20 Set Assortment (Save $20)

Weather Pack Connectors are some of the best weather tight connectors available for automotive wiring. This option will give you an assortment of 20 different 1-way to 6-way sets to use for your install. All sets with with a male & female connector, male & female terminals & slide-on weather proofing seals.

Add Switches: Headlight, Ignition, Dimmer (Save $21)

Save some money on this standard set of switches by adding them to your harness. Included with your harness will be an ignition switch, 3-position headlight switch & a floor dimmer switch. All terminals and connectors will come with the switches as well.

Wiring Tools: Stripper, U-Barrel Crimper, Tester, Removal Tool (Save $22)

Make cutting, stripping, terminating & testing your circuits easy with this wiring tools kit. With your kit will come a wire stripper, u-barrel crimper, terminal removal tool & a lighted circuit tester.

Split Braided Loom: 15ft - 1/4", 15ft - 1/2, 10ft - 3/4" (Save $25)

Make your wiring install look clean with this set of split braided nylon wire loom. Included will be 15 feet of 1/4", 15 feet of 1/2" & 10 feet of 3/4" and is often enough wire loom for the entire vehicle.

Product Reviews

Write Review

  1. good product

    Posted by billy d on 21st Jul 2014

    easy to install works well

  2. Super Nice & Easy

    Posted by Unknown on 1st Apr 2014

    Using this harness and fuse block was great. I was able to place fuse block exactly where I wanted to. I used the book was very helpful I checked off wires and made notes as I went. The whole job went much easier than I expected

  3. Great product

    Posted by Gary Rogers on 4th Mar 2014

    every thing seems great have hah time to get it all instaled yet but what I have used so far seems very good.

Find Similar Products by Category